PRODUCTS DETAILS

Home > Products >

3mm Hot Rolled Inconel 600 Plate UNS N06600 with High Corrosion Resistance

Products

Cold Rolled Stainless Steel Sheet

Hot Rolled Stainless Steel Plate

Stainless Steel Checkered Plate

Aluminum Material

Mr. Gao Ben

benwallace2012@hotmail.com

86-0510-88688870

Contact Now

3mm Hot Rolled Inconel 600 Plate UNS N06600 with High Corrosion Resistance

MOQ:	50
Price:	10.55

Details Information

Product Description

Detail Information

Certification

AISI, ASTM

Thickness:

3mm

Width:

1200mm

Length:

3000mm

Material Grade:

Inconel 600

Nickel Content:

72.0-76.0%

Chromium Content:

14.0-17.0%

Iron Content:

6.0-10.0%

Carbon Content:

Max 0.15%

Manganese Content:

Max 1.0%

Silicon Content:

Max 0.5%

Sulfur Content:

Max 0.015%

Ultimate Tensile Strength:

760 MPa

Yield Strength:

585 MPa

Elongation:

10%

Surface Treatment:

Polished

Highlight:

3mm Inconel 600 Plate

Hot Rolled Nickel-Chromium Alloy Plate

Corrosion Resistant UNS N06600 Plate

Product Description

Inconel 600 Plate 3mm X 1200 X 3000 DIN 2.4816

Product Overview

Inconel 600 (UNS N06600 / DIN 2.4816) is a nickel-chromium alloy designed for use from cryogenic to elevated temperatures up to 2000°F (1093°C). This high-performance material offers excellent oxidation resistance, good performance in carburizing and chloride-containing environments, and remarkable mechanical properties.

Chemical Composition

Ni 72.0%, Cr 15.5%, Fe 8.0%, Mn 1.0%, C 0.15%, Cu 0.5%, Si 0.5%, S 0.015%

Key Characteristics

Resistant to wide range of corrosive media
Virtually immune to chlorine ion stress corrosion cracking
Excellent resistance to organic acids (acetic, formic, stearic)
Minimal attack in dry gases like chlorine or hydrogen chloride up to 550°C
Good scaling resistance and high strength at elevated temperatures
Resists ammonia-bearing atmospheres, nitrogen, and carburizing gases
Non-magnetic with excellent mechanical properties
Good workability and readily weldable

Typical Applications

Thermocouple sheaths
Ethylene dichloride (EDC) cracking tubes
Reactor vessels and heat exchanger tubing in vinyl chloride production
Process equipment for chlorinated and fluorinated hydrocarbons
Nuclear reactor components (control rod guide tubes, steam generator baffle plates)
Furnace retort seals, fans, and fixtures
Roller hearths and radiant tubes in carbon nitriding processes
Chemical and food processing equipment

Chemical Requirements

Element	Min (%)	Max (%)
Ni	72.0	-
C	-	0.15
Mn	-	1.0
Cr	14.0	17.0
S	-	0.015
Si	-	0.5
Fe	6.0	10.0

Mechanical Property Requirements

Condition	Ultimate Tensile (Min)	Yield Strength 0.2% OS (Min)	Elongation in 2" (Min %)
Cold Worked/As Worked	110 KSi / 760 MPa	85 KSi / 585 MPa	10
Hot Worked/As Worked	90 KSi / 620 MPa	40 KSi / 275 MPa	25

D- Forging quality is furnished to chemical requirements and surface inspection only. No mechanical properties required.

Specifications

Form	Standard
Metal Type	UNS N06600
Bar	ASTM B166 AMS 5665 Din 17752
Sheet/Plate	ASTM B168 AMS 5540 Din 17750
Tube/Pipe	ASTM B167
Forging	ASTM B564 Din 17754
Weld Wire	FM 82/ ERNiCr-3
Weld Electrode	FM 182/ ENiCrFe-3
DIN	2.4816

Machining Data

Machining Type	Suggested Starting Rates
Single Point Turning	Roughing: 0.15" depth, 0.015"/rev feed - 175 SFM Finishing: 0.025" depth, 0.007"/rev feed - 200 SFM
Drilling	1/4" Dia: 0.004"/rev feed - 60 SFM 1/2" Dia: 0.007"/rev feed - 60 SFM 3/4" Dia: 0.010"/rev feed - 60 SFM
Reaming	Feed - same as drilling - 100 SFM
Side and Slot Milling	Roughing: 0.25" depth - 0.007"/tooth feed - 125 SFM Finishing: 0.050" depth - 0.009"/tooth feed - 140 SFM

Carbide tools suggested. Type C-2 for roughing, drilling and reaming. Type C-3 for finishing. Rates better than 50% of Type 304.

Available Forms

High Performance Alloys stocks and produces Inconel 600 in bar, wire cuts, sheet, plate, strip, tube, and pipe.

Product Packaging

INCONEL® is a registered trademark of Special Metals Corporation.

Tags:

0.12mm 304 Stainless Steel Sheet,

316L 304 ss sheet metal,

0.1mm SS304 Stainless Steel Sheet

317L Stainless Steel Plate Hot Rolled 3-10mm Chemical Composition of 317l Stainless Steel

Contact Now

SUS440A S44002 Martensitic Stainless Steel Plate 3.0mm 4.0mm Hot Rolled 9Cr18Mo Plate

Contact Now

Corrosion Resistant Alloy 317L (UNS S31703) W. Nr. 1.4438 Stainless Steel Plate 415006000mm

Contact Now

Stainless Steel 317L Plate ASTM ASME AISI317L DIN1.4438 8MM Thickness 1000-2000mm

Contact Now

Hot Rolled SUS440A 440B 440C Stainless Steel Plate 9Cr18Mo Steel Plate Cutting

Contact Now

Hot Rolled 400 Series 416 UNS S41600 Martensitic Free Machining Stainless Steel Plate 6-80mm

Contact Now

Hot Rolled ASTM A240 A240M SS Plate 12Cr13 SUS410 AISI 410 6m 10mm 8mm 1500*6000mm

Contact Now

PRODUCTS DETAILS

Products

Cold Rolled Stainless Steel Sheet

Hot Rolled Stainless Steel Plate

Stainless Steel Checkered Plate

Stainless Steel Strip Coil

Stainless Steel Welded Tube

Stainless Steel Seamless Tube

Stainless Steel Round Bar

Stainless Steel Angle Bar

Stainless Steel Flat Bar

Stainless Steel U Bar

Stainless Steel Square Bar

Stainless Steel Hex Bar

Duplex Stainless Steel

Hastelloy Alloy

Nickel Alloy

Monel Alloy

Nitronic Alloy

Incoloy Alloy

Inconel Alloy

Titanium Alloy

Copper Material

Aluminum Material

3mm Hot Rolled Inconel 600 Plate UNS N06600 with High Corrosion Resistance

MOQ:	50
Price:	10.55

Detail Information

Product Description

Detail Information

Certification

AISI, ASTM

Thickness:

3mm

Width:

1200mm

Length:

3000mm

Material Grade:

Inconel 600

Nickel Content:

72.0-76.0%

Chromium Content:

14.0-17.0%

Iron Content:

6.0-10.0%

Carbon Content:

Max 0.15%

Manganese Content:

Max 1.0%

Silicon Content:

Max 0.5%

Sulfur Content:

Max 0.015%

Ultimate Tensile Strength:

760 MPa

Yield Strength:

585 MPa

Elongation:

10%

Surface Treatment:

Polished

Minimum Order Quantity:

Price:

10.55

Highlight

3mm Inconel 600 Plate

Hot Rolled Nickel-Chromium Alloy Plate

Corrosion Resistant UNS N06600 Plate

Product Description

Inconel 600 Plate 3mm X 1200 X 3000 DIN 2.4816

Product Overview

Chemical Composition

Ni 72.0%, Cr 15.5%, Fe 8.0%, Mn 1.0%, C 0.15%, Cu 0.5%, Si 0.5%, S 0.015%

Key Characteristics

Resistant to wide range of corrosive media
Virtually immune to chlorine ion stress corrosion cracking
Excellent resistance to organic acids (acetic, formic, stearic)
Minimal attack in dry gases like chlorine or hydrogen chloride up to 550°C
Good scaling resistance and high strength at elevated temperatures
Resists ammonia-bearing atmospheres, nitrogen, and carburizing gases
Non-magnetic with excellent mechanical properties
Good workability and readily weldable

Typical Applications

Thermocouple sheaths
Ethylene dichloride (EDC) cracking tubes
Reactor vessels and heat exchanger tubing in vinyl chloride production
Process equipment for chlorinated and fluorinated hydrocarbons
Nuclear reactor components (control rod guide tubes, steam generator baffle plates)
Furnace retort seals, fans, and fixtures
Roller hearths and radiant tubes in carbon nitriding processes
Chemical and food processing equipment

Chemical Requirements

Element	Min (%)	Max (%)
Ni	72.0	-
C	-	0.15
Mn	-	1.0
Cr	14.0	17.0
S	-	0.015
Si	-	0.5
Fe	6.0	10.0

Mechanical Property Requirements

Condition	Ultimate Tensile (Min)	Yield Strength 0.2% OS (Min)	Elongation in 2" (Min %)
Cold Worked/As Worked	110 KSi / 760 MPa	85 KSi / 585 MPa	10
Hot Worked/As Worked	90 KSi / 620 MPa	40 KSi / 275 MPa	25

D- Forging quality is furnished to chemical requirements and surface inspection only. No mechanical properties required.

Specifications

Form	Standard
Metal Type	UNS N06600
Bar	ASTM B166 AMS 5665 Din 17752
Sheet/Plate	ASTM B168 AMS 5540 Din 17750
Tube/Pipe	ASTM B167
Forging	ASTM B564 Din 17754
Weld Wire	FM 82/ ERNiCr-3
Weld Electrode	FM 182/ ENiCrFe-3
DIN	2.4816

Machining Data

Machining Type	Suggested Starting Rates
Single Point Turning	Roughing: 0.15" depth, 0.015"/rev feed - 175 SFM Finishing: 0.025" depth, 0.007"/rev feed - 200 SFM
Drilling	1/4" Dia: 0.004"/rev feed - 60 SFM 1/2" Dia: 0.007"/rev feed - 60 SFM 3/4" Dia: 0.010"/rev feed - 60 SFM
Reaming	Feed - same as drilling - 100 SFM
Side and Slot Milling	Roughing: 0.25" depth - 0.007"/tooth feed - 125 SFM Finishing: 0.050" depth - 0.009"/tooth feed - 140 SFM

Carbide tools suggested. Type C-2 for roughing, drilling and reaming. Type C-3 for finishing. Rates better than 50% of Type 304.

Available Forms

High Performance Alloys stocks and produces Inconel 600 in bar, wire cuts, sheet, plate, strip, tube, and pipe.

Product Packaging

INCONEL® is a registered trademark of Special Metals Corporation.

Tags: