Detalhes dos produtos

Casa > produtos >

Corrosion Resistant Hot Rolled Inconel 625 Plate High Strength Nickel Base 625 Sheet

produtos

Folha de aço inoxidável laminada

Placa de aço inoxidável laminada a alta temperatura

Placa quadriculado de aço inoxidável

bobina de aço inoxidável da tira

Tubo soldado de aço inoxidável

Tubo sem emenda de aço inoxidável

Barra redonda de aço inoxidável

barra de ângulo de aço inoxidável

Barras quadradas de aço inoxidável

Barras hexagonais de aço inoxidável

de aço inoxidável frente e verso

Material de alumínio

Contacte-nos

Mr. Gao Ben

benwallace2012@hotmail.com

86-0510-88688870

Contacte agora

Corrosion Resistant Hot Rolled Inconel 625 Plate High Strength Nickel Base 625 Sheet

MOQ:	50
preço:	12.35

Informações

Descrição do produto

Informações pormenorizadas

Certificação

AISI, ASTM

Número do modelo:

Inconel 625

Forma:

Plano

Técnica:

Laminado a quente

Tratamento de superfície:

Polido

Especificação:

1220*2440, 1500*3000, 1500*6000, 2000*6000 mm

Conteúdo de níquel:

58,0 minutos.

índice do cromo:

20,0 min.-23,0 máx.

Teor de Molibdênio:

8,0 min.-10,0 máx.

Conteúdo de Nióbio:

3,15 min.-4,15 máx.

Densidade:

80,44 g/cm3

Faixa de fusão:

2350 - 2460°F (1290 - 1350°C)

Força de rendimento:

65.000 psi (mín.)

Resistência à tração final:

125.000 psi (mín.)

Alongamento:

50% (mínimo)

Dureza:

200 Brinell (máx.)

Destacar:

Corrosion Resistant Inconel 625 Plate

Hot Rolled Alloy 625 Sheet

High Strength Nickel Base 625 Plate

Descrição do produto

Inconel 625 Alloy 625 DIN2.4856 Plate & Sheet

Manufactured in USA by SMC/ATI/HAYNES

General Properties

Alloy 625 is an austenitic nickel-chromium-molybdenum-niobium alloy offering exceptional corrosion resistance combined with high strength from cryogenic temperatures to 1800°F (982°C). The alloy's strength comes from solid-solution hardening by molybdenum and niobium, eliminating the need for precipitation-hardening treatments.

This chemical composition provides outstanding corrosion resistance in severe operating environments, with excellent resistance to oxidation, carburization, pitting, crevice corrosion, impingement corrosion, intergranular attack, and near-immunity to chloride stress corrosion cracking.

Applications

Aerospace Components: bellows, expansion joints, ducting systems, jet engine exhaust systems, engine thrust-reversers, turbine shroud rings
Air Pollution Control: chimney liners, dampers, flue gas desulfurization (FGD) components
Chemical Processing: equipment handling both oxidizing and reducing acids, super-phosphoric acid production
Marine Service: steam line bellows, Navy ship exhaust systems, submarine auxiliary propulsion systems
Nuclear Industry: reactor core and control rod components, waste reprocessing equipment
Offshore Oil and Gas Production: waste flare gas stacks, piping systems, riser sheathing, sour gas piping and tubing
Petroleum Refining: waste flare gas stacks
Waste Treatment: waste incineration components

Standards

ASTM: B 443 | ASME: SB 443 | AMS: 5599

Chemical Composition

Weight % (all values are maximum unless a range is indicated)

Element	Content	Element	Content
Nickel	58.0 min.	Silicon	0.50
Chromium	20.0 min.-23.0 max.	Phosphorus	0.015
Molybdenum	8.0 min.-10.0 max.	Sulfur	0.015
Iron	5.0	Aluminum	0.40
Niobium (plus Tantalum)	3.15 min.-4.15 max.	Titanium	0.40
Carbon	0.10	Cobalt (if determined)	1.0
Manganese	0.50

Physical Properties

Property	Imperial Units	Metric Units
Density	0.305 lbs/in³	8.44 g/cm³
Specific Heat	0.102 BTU/lb-°F (32-212°F)	427 J/kg-°K (0-100°C)
Modulus of Elasticity	30.1 x 10⁶ psi	207.5 GPa
Thermal Conductivity	75 BTU/hr/ft²/ft/°F	10.8 W/m-°K
Melting Range	2350 - 2460°F	1290 - 1350°C
Electrical Resistivity	50.8 Microhm-in at 70°C	128.9 Microhm-cm at 210°C

Thermal Expansion

Temperature	Mean Coefficient
200°F (93°C)	7.1 x 10⁻⁶ in/in/°F \| 12.8 x 10⁻⁶ cm/cm°C
400°F (204°C)	7.3 x 10⁻⁶ in/in/°F \| 13.1 x 10⁻⁶ cm/cm°C
600°F (316°C)	7.4 x 10⁻⁶ in/in/°F \| 13.3 x 10⁻⁶ cm/cm°C
800°F (427°C)	7.6 x 10⁻⁶ in/in/°F \| 13.7 x 10⁻⁶ cm/cm°C
1000°F (538°C)	7.8 x 10⁻⁶ in/in/°F \| 14.0 x 10⁻⁶ cm/cm°C
1200°F (649°C)	8.2 x 10⁻⁶ in/in/°F \| 14.8 x 10⁻⁶ cm/cm°C
1400°F (760°C)	8.5 x 10⁻⁶ in/in/°F \| 15.3 x 10⁻⁶ cm/cm°C
1600°F (871°C)	8.8 x 10⁻⁶ in/in/°F \| 15.8 x 10⁻⁶ cm/cm°C
1700°F (927°C)	9.0 x 10⁻⁶ in/in/°F \| 16.2 x 10⁻⁶ cm/cm°C

Mechanical Properties

Typical Values at 68°F (20°C)

Yield Strength (0.2% Offset)	Ultimate Tensile Strength	Elongation in 2 in.	Hardness
65,000 psi (448 MPa)	125,000 psi (862 MPa)	50%	200 Brinell (max)

Corrosion Resistance

Alloy 625's highly alloyed composition provides exceptional corrosion resistance in severe environments. The alloy is virtually immune to attack in mild conditions including atmosphere, fresh and sea water, neutral salts, and alkaline solutions. Nickel and chromium provide resistance to oxidizing solutions, while nickel and molybdenum supply resistance in non-oxidizing environments.

Pitting Resistance Equivalency Numbers (PREN)

Alloy	Ni	Cr	Mo	W	Nb	N	PREN
316 Stainless Steel	12	17	2.2	-	-	-	20.4
317 Stainless Steel	13	18	3.8	-	-	-	23.7
Alloy 825	42	21.5	3	-	-	-	26.0
Alloy 625	62	22	9	-	3.5	-	40.8
Alloy C-276	58	16	16	3.5	-	-	45.2

Fabrication Data

Hot Forming

Hot-working temperature range: 1650 - 2150°F (900 - 1177°C). Heavy working should occur near 2150°F (1177°C), with lighter working down to 1700°F (927°C). Use uniform reductions to prevent duplex grain structure.

Cold Forming

Alloy 625 can be cold-formed using standard shop practices in the annealed condition. Work hardening rates are higher than austenitic stainless steels.

Welding

Readily welded by GTAW (TIG), PLASMA, GMAW (MIG/MAG), SAW and SMAW (MMA). No post weld heat treatment required. Brushing with stainless steel wire brush removes heat tint.

Machining

Machine in annealed condition using low cutting speeds with continuous tool engagement. Adequate cut depth prevents contact with work-hardened zones.

Packaging

Etiquetas:

folha 304 de aço inoxidável de 0.12mm,

chapa metálica de 316L 304 ss,

folha SS304 de aço inoxidável de 0.1mm

Produtos recomendados

317L Chapa de aço inoxidável laminada a quente 3-10 mm Composição química de 317l aço inoxidável

Contacte agora

SUS440A S44002 Chapa de aço inoxidável martensítico de 3,0 mm, 4,0 mm, laminada a quente 9Cr18Mo

Contacte agora

Liga resistente à corrosão 317L (UNS S31703) W. No 1.4438 Chapa de aço inoxidável 415006000mm

Contacte agora

Chapa de aço inoxidável 317L ASTM ASME AISI317L DIN1.4438 8MM Espessura 1000-2000mm

Contacte agora

Tela de aço inoxidável laminada a quente SUS440A 440B 440C

Contacte agora

Placas de aço inoxidável laminadas a quente da série 400 416 UNS S41600

Contacte agora

Placa ASTM A240 A240M SS laminada a quente 12Cr13 SUS410 AISI 410 6m 10mm 8mm 1500*6000mm

Contacte agora

Detalhes dos produtos

produtos

Folha de aço inoxidável laminada

Placa de aço inoxidável laminada a alta temperatura

Placa quadriculado de aço inoxidável

bobina de aço inoxidável da tira

Tubo soldado de aço inoxidável

Tubo sem emenda de aço inoxidável

Barra redonda de aço inoxidável

barra de ângulo de aço inoxidável

Barra lisa de aço inoxidável

Barras U de aço inoxidável

Barras quadradas de aço inoxidável

Barras hexagonais de aço inoxidável

de aço inoxidável frente e verso

Liga de Hastelloy

Ligação de níquel

Liga de Monel

Ligação nitrónica

Liga de Incoloy

Liga de Inconel

Liga de titânio

material de cobre

Material de alumínio

Corrosion Resistant Hot Rolled Inconel 625 Plate High Strength Nickel Base 625 Sheet

MOQ:	50
preço:	12.35

Informações pormenorizadas

Descrição do produto

Informações pormenorizadas

Certificação

AISI, ASTM

Número do modelo:

Inconel 625

Forma:

Plano

Técnica:

Laminado a quente

Tratamento de superfície:

Polido

Especificação:

1220*2440, 1500*3000, 1500*6000, 2000*6000 mm

Conteúdo de níquel:

58,0 minutos.

índice do cromo:

20,0 min.-23,0 máx.

Teor de Molibdênio:

8,0 min.-10,0 máx.

Conteúdo de Nióbio:

3,15 min.-4,15 máx.

Densidade:

80,44 g/cm3

Faixa de fusão:

2350 - 2460°F (1290 - 1350°C)

Força de rendimento:

65.000 psi (mín.)

Resistência à tração final:

125.000 psi (mín.)

Alongamento:

50% (mínimo)

Dureza:

200 Brinell (máx.)

Quantidade de ordem mínima:

Preço:

12.35

Destacar

Corrosion Resistant Inconel 625 Plate

Hot Rolled Alloy 625 Sheet

High Strength Nickel Base 625 Plate

Descrição do produto

Inconel 625 Alloy 625 DIN2.4856 Plate & Sheet

Manufactured in USA by SMC/ATI/HAYNES

General Properties

Applications

Aerospace Components: bellows, expansion joints, ducting systems, jet engine exhaust systems, engine thrust-reversers, turbine shroud rings
Air Pollution Control: chimney liners, dampers, flue gas desulfurization (FGD) components
Chemical Processing: equipment handling both oxidizing and reducing acids, super-phosphoric acid production
Marine Service: steam line bellows, Navy ship exhaust systems, submarine auxiliary propulsion systems
Nuclear Industry: reactor core and control rod components, waste reprocessing equipment
Offshore Oil and Gas Production: waste flare gas stacks, piping systems, riser sheathing, sour gas piping and tubing
Petroleum Refining: waste flare gas stacks
Waste Treatment: waste incineration components

Standards

ASTM: B 443 | ASME: SB 443 | AMS: 5599

Chemical Composition

Weight % (all values are maximum unless a range is indicated)

Element	Content	Element	Content
Nickel	58.0 min.	Silicon	0.50
Chromium	20.0 min.-23.0 max.	Phosphorus	0.015
Molybdenum	8.0 min.-10.0 max.	Sulfur	0.015
Iron	5.0	Aluminum	0.40
Niobium (plus Tantalum)	3.15 min.-4.15 max.	Titanium	0.40
Carbon	0.10	Cobalt (if determined)	1.0
Manganese	0.50

Physical Properties

Property	Imperial Units	Metric Units
Density	0.305 lbs/in³	8.44 g/cm³
Specific Heat	0.102 BTU/lb-°F (32-212°F)	427 J/kg-°K (0-100°C)
Modulus of Elasticity	30.1 x 10⁶ psi	207.5 GPa
Thermal Conductivity	75 BTU/hr/ft²/ft/°F	10.8 W/m-°K
Melting Range	2350 - 2460°F	1290 - 1350°C
Electrical Resistivity	50.8 Microhm-in at 70°C	128.9 Microhm-cm at 210°C

Thermal Expansion

Temperature	Mean Coefficient
200°F (93°C)	7.1 x 10⁻⁶ in/in/°F \| 12.8 x 10⁻⁶ cm/cm°C
400°F (204°C)	7.3 x 10⁻⁶ in/in/°F \| 13.1 x 10⁻⁶ cm/cm°C
600°F (316°C)	7.4 x 10⁻⁶ in/in/°F \| 13.3 x 10⁻⁶ cm/cm°C
800°F (427°C)	7.6 x 10⁻⁶ in/in/°F \| 13.7 x 10⁻⁶ cm/cm°C
1000°F (538°C)	7.8 x 10⁻⁶ in/in/°F \| 14.0 x 10⁻⁶ cm/cm°C
1200°F (649°C)	8.2 x 10⁻⁶ in/in/°F \| 14.8 x 10⁻⁶ cm/cm°C
1400°F (760°C)	8.5 x 10⁻⁶ in/in/°F \| 15.3 x 10⁻⁶ cm/cm°C
1600°F (871°C)	8.8 x 10⁻⁶ in/in/°F \| 15.8 x 10⁻⁶ cm/cm°C
1700°F (927°C)	9.0 x 10⁻⁶ in/in/°F \| 16.2 x 10⁻⁶ cm/cm°C

Mechanical Properties

Typical Values at 68°F (20°C)

Yield Strength (0.2% Offset)	Ultimate Tensile Strength	Elongation in 2 in.	Hardness
65,000 psi (448 MPa)	125,000 psi (862 MPa)	50%	200 Brinell (max)

Corrosion Resistance

Pitting Resistance Equivalency Numbers (PREN)

Alloy	Ni	Cr	Mo	W	Nb	N	PREN
316 Stainless Steel	12	17	2.2	-	-	-	20.4
317 Stainless Steel	13	18	3.8	-	-	-	23.7
Alloy 825	42	21.5	3	-	-	-	26.0
Alloy 625	62	22	9	-	3.5	-	40.8
Alloy C-276	58	16	16	3.5	-	-	45.2

Fabrication Data

Hot Forming

Cold Forming

Alloy 625 can be cold-formed using standard shop practices in the annealed condition. Work hardening rates are higher than austenitic stainless steels.

Welding

Readily welded by GTAW (TIG), PLASMA, GMAW (MIG/MAG), SAW and SMAW (MMA). No post weld heat treatment required. Brushing with stainless steel wire brush removes heat tint.

Machining

Machine in annealed condition using low cutting speeds with continuous tool engagement. Adequate cut depth prevents contact with work-hardened zones.

Packaging

Etiquetas: