|
| MOQ: | 50 |
| 価格: | 2.15 |
| Surface Finish | Characteristics and Application |
|---|---|
| NO.2B | Better surface brightness and flatness than NO.2D. Through special surface treatment to improve mechanical properties, suitable for comprehensive uses. |
| NO.1 | Surface finished by heat treatment and pickling after hot rolling. |
| NO.4 | Polished with abrasive belt of grit #150-#180, better brightness with discontinuous coarse stria. Used for bathtubs, building ornaments, electrical appliances, kitchen utensils, and food processing equipment. |
| HL | Polished with abrasive belt of grit #150-#320 on NO.4 finish with continuous streaks. Mainly used for building ornaments, elevators, building doors, and frontal plates. |
| BA | Cold rolled, bright annealed and skin-passed. Excellent brightness and good reflexivity like mirror. Used for kitchen apparatus and ornaments. |
| 8K | Excellent brightness and preferred reflexivity, can be used as mirror. |
| Property | Value | Property | Value |
|---|---|---|---|
| Tensile strength σb (MPa) | ≥ 520 | Specific heat capacity (0~100ºC, KJ/kgK) | 0.50 |
| Yield strength σ0.2 (MPa) | ≥ 205 | Thermal conductivity (W/m·K) | 16.3 (100ºC), 21.5 (500ºC) |
| Elongation δ5 (%) | ≥ 40 | Linear expansion coefficient | 17.2 (0~100ºC), 18.4 (0~500ºC) |
| Section shrinkage ψ (%) | ≥ 60 | Resistivity (20ºC, 10⁻⁶ Ω·m) | 0.73 |
| Hardness | ≤ 187HB; ≤ 90HRB; ≤ 200HV | Longitudinal elastic modulus (20ºC, KN/mm²) | 193 |
| Melting point (ºC) | 1398 ~ 1454 | Specific heat capacity | 0.50 |
|
|
| MOQ: | 50 |
| 価格: | 2.15 |
| Surface Finish | Characteristics and Application |
|---|---|
| NO.2B | Better surface brightness and flatness than NO.2D. Through special surface treatment to improve mechanical properties, suitable for comprehensive uses. |
| NO.1 | Surface finished by heat treatment and pickling after hot rolling. |
| NO.4 | Polished with abrasive belt of grit #150-#180, better brightness with discontinuous coarse stria. Used for bathtubs, building ornaments, electrical appliances, kitchen utensils, and food processing equipment. |
| HL | Polished with abrasive belt of grit #150-#320 on NO.4 finish with continuous streaks. Mainly used for building ornaments, elevators, building doors, and frontal plates. |
| BA | Cold rolled, bright annealed and skin-passed. Excellent brightness and good reflexivity like mirror. Used for kitchen apparatus and ornaments. |
| 8K | Excellent brightness and preferred reflexivity, can be used as mirror. |
| Property | Value | Property | Value |
|---|---|---|---|
| Tensile strength σb (MPa) | ≥ 520 | Specific heat capacity (0~100ºC, KJ/kgK) | 0.50 |
| Yield strength σ0.2 (MPa) | ≥ 205 | Thermal conductivity (W/m·K) | 16.3 (100ºC), 21.5 (500ºC) |
| Elongation δ5 (%) | ≥ 40 | Linear expansion coefficient | 17.2 (0~100ºC), 18.4 (0~500ºC) |
| Section shrinkage ψ (%) | ≥ 60 | Resistivity (20ºC, 10⁻⁶ Ω·m) | 0.73 |
| Hardness | ≤ 187HB; ≤ 90HRB; ≤ 200HV | Longitudinal elastic modulus (20ºC, KN/mm²) | 193 |
| Melting point (ºC) | 1398 ~ 1454 | Specific heat capacity | 0.50 |
